BEI announces Omnicoder programmable encoder

博主：adminadmin 11-13 28 0条评论

温馨提示：这篇文章已超过39天没有更新，请注意相关的内容是否还可用！

　　BEI Industrial Encoders introduces Omnicoder, an incremental encoder that allows users to easily program the resolution anywhere between 1 and 10,000 counts per turn. Packaged in BEI’s Model H25 encoder, the Omnicoder allows for virtually unlimited resolution variations.

　　Users can produce a wide range of resolutions from one encoder and it can be reprogrammed as needed to change the resolution. The Omnicoder programs over its existing M18 connector. Using an M18-to-USB programming cable, simply plug the Omnicoder directly into any PC. The programming software automatically detects the Omnicoder.

　　Equipment can often have many encoders with various resolutions providing feedback to the control system. Omnicoder units can be kept on the shelf and programmed as needed. Users simply program an Omnicoder for the appropriate resolution and equipment is up and running in no time. This not only reduces machine downtime, but saves on inventory costs as well.

The End

发布于：2024-11-13，除非注明，否则均为阿赫网原创文章，转载请注明出处。